The Skyline Series Heavy Sliding Glass Shower Door

This is a very modern and popular option for shower enclosures. It is a completely frameless, heavy glass sliding door for your shower stall. The enclosure that you see here was installed in Santa Cruz, California. The glass is 3/8″ clear, and the hardware is brushed stainless steel. The enclosure is manufactured by Cardinal Shower Enclosures, located in Livermore, California.

The fixed panel is installed using a solid stainless steel bar that spans the width of the shower stall. There are additional stainless steel fixtures that fasten the stationary glass panel to the wall (to the right in this instance.) The sliding panel has rollers that are attached through holes that are cut in the glass. These rollers allow the door to glide along the same solid stainless steel bar that helps to support the fixed panel.

The result is a heavy glass shower enclosure with a rolling door that is truly frameless, and has minimal hardware of any kind. The gaps around the fixed panel (which are also minimal,) are sealed using clear RTV silicone. The gap where the door meets the wall is sealed with a polycarbonate edge seal. There is no hardware at the bottom of the enclosure with the exception of a small guide for the sliding door.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *