Seals in Steam Shower Enclosures
The frameless door in my steam shower is supposed to go to the ceiling. It was installed with a plastic edging that causes the door to scrape the ceiling so hard the paint comes off. I took off the plastic edging but there is now a gap at the top of the door. Is this normal? How should it have been done?
Virginia
Hi Virginia,
When people get a new steam shower they often think that the enclosure needs to be air-tight. Not only is this untrue, it is a bad idea. While it is obvious that you want to trap the steam inside of the shower so you can enjoy the hot, steamy goodness of it all, it isn’t necessary to become obsessed with the tiniest bit of steam escaping. Only you can decide if enough of the steam is staying in the shower.
It is always a challenge to keep the maximum amount of steam in while making the door operate correctly. It sounds like, in your case, it required removing one of the seals. You have to decide if the steam shower is functioning the way you think it should without it. If you feel that too much steam is escaping, it may be possible to attach an edge seal to the ceiling of the shower, rather than the glass. Sometimes that is a solution…
Let me know how things work out, OK?
Chris