Shower Door Issues – Buyer Beware!
Hi Chris,
I was so happy to see your web site and hope to find some answers to some of our shower questions. In the master bathroom we installed a frameless shower door with L shape panels. After about 3 weeks the door was hitting the glass panel. We had the installer come out and all he does was tighten up the screws in the wall. It works for about a month and then we have the same problem. We have done this several times which resulted in a cracked tile. I have also noticed the wall the shower door is attached to is now bowing a little in the middle. Is there a fix to this?
Secondly, in our other bathroom we are experiencing major water leaks coming from underneath the door. Our installer says we have a water problem not a installation problem. I’m not sure what he meant by that but either way he will not be return to our home again. My husband and I would like to take down the shower door and panel (after spending so much money and time into it) because it just does not work. The problem we are having is that the U channel our installer screwed on to the wall is full of silicone and we can not remove the glass panel from it. We have scraped as much silicone out as we can but it is not budging. Is there anything we can use to detach the panel from the U channel?
Thank you for all your help!
Mike
Hi Mike,
I’m sorry to hear that you are having so many problems with your shower doors! The silicone is a very strong adhesive, as you have found out already… Without actually being there, it is kind of hard to know what to do, but I’ll try to give you a couple of suggestions. I would try a very thin putty knife, something thin enough to slide in between the aluminum and the glass on the inside of the channel. Try running it all the way up and down both sides of the glass to see if that is enough to allow the glass to come loose. This is a situation where I would use a glass-setting vacuum cup, but you probably don’t have one. It would allow you to get some leverage on the glass and apply a lot of pressure to try to get it loose.
One other option, if you can’t get the glass out of the channel, is to try to get between the channel and the tile to cut the screws off. A thin saw blade may allow this, but it is also likely to mar the tile. Give these things a try, and get back to me and let me know if you are having any success.
Best wishes,
-Chris
